Backup Rear | Front View Camera: No Distorted Affect Starlight Night Vision HD Waterproof CVBS | AHD Hitch Backup Reverse Rear | Front View Camera License Plate for Cars Pickup Trucks SUV RV Van
(as of Oct 03,2022 18:44:13 UTC – Details)
As a burgeoning manufacturer of top-notch OEM&ODM vehicle electronic products, NATIKA aims to serve even the most demanding needs of worldwide clientele.Invariably, we believe that customer experience counts far more than short-term profits, so we make concerted efforts to design, manufacture, and improve our products and services in an innovative and responsible fashion.
NATIKA backup camera WD-779 support license plate or bracket surface mount option, no distorted & no-fish-eye effect, starlight level night vision,IP69K IP rating reliable waterproof and horizontal 135 degrees REAL wide view angle.
This car backup camera with 3 useful wire loops:
*To use as a Forward Camera, please cut the WHITE wire loop;
*Cut the GREEN wire loop to remove the distance guidelines;
*Cut the PURPLE wire loop to choose AHD (720P, 30fps) signal output.
**Please power on again after you cut any color wire loops, then the image should be correct.
**Note: this camera is a rear view camera with the guidelines and CVBS video signal output as DEFAULT.
**The distance guidelines will disappear after you cut the purple wire loop,regardless of whether you cut the green wire loop,then you can use the head unit’s self-existent distance guidelines.
What you get:
1 x NATIKA Surface Mount Backup Camera; 1 x 26ft/8M Extension Wire/Cable; 1 x 304 stainless steel Long bracket; 1 x Double Tape; 4 x 304 stainless steel screws; 1 x Electrical Tape; 1 x Panel Remover; 7 x Zip Ties; 1 x User Manual; 1 x Thanks Card; 1 x NATIKA Gift Box
*Before you cut this vehicle backup camera’s purple wire loop to choose AHD 720P 30fps video signal output, please make sure your Android stereo support AHD video signal input first(most of old Android stereos do not support it,and it works well on selected ATOTO car stereos (F7 Series, S8 series and A6 KarLink version,can not work on ATOTO A6Y Series Android stereo or SA102 Starter).
*If connect this car rear view camera to a FACTORY RADIO, please separately order a suited harness to complete installation, because different RADIO need different harness to work together.
*keep this car backup/front view camera’s short camera wire and 26ft extension wire away from high temperature area, such as engine or exhaust. Also please clean this backup car camera’s lens regularly to free it from dirt, water drops, snow drops and etc.
*This backup car camera doesn’t fit sucked type dash cam and mirror dash cam, because these dash cam have different connectors and PIN definition, even some of them with same 4 PIN connector.
*If connect this hitch licence plate backup camera to a GPS navigator, such as Garmin or TomTom, please separately order one more adapter which with a RCA to 2.5mm connector to complete installation.
*After install this AHD rear view camera, if the image on the screen is blurry, flickering/flash,black ,black-and white, has horizontal or vertical strip, please check all your power and video connections to make sure all of them are solid. Possibly use a different ground point(iron/metal part) and wrap power and video plugs with electrical tape to insulate from interference. If it still can’t be solved, please order a 12V DC power adapter filter rectifier or relay to solve it, especially need for Dodge, VW, AUDI ,BMW ,Mercedes Benz,Porsche,Mini and Skoda brands vehicle.
*This car reverse camera is perfect for rear and front view,head unit NOT include.
*This License Plate hitch Backup Camera working great for Cars Pickup Trucks SUV RV Van.
* If you use T-taps for connection of this vehicle backup camera license plate and power source (reversing light), please kindly check and see if it works(connection is solid or not).
*Before you routing the 26ft extension wire inside of vehicle body, if there is no image on the screen, other than check the backup car camera, please check the video input setup,find the button “R-CAM Interrupt”and choose “ON”,then start to test backup camera.You can use other device with RCA connector, such as TV or a small 4.3”/5” /7” monitor to check if the camera works.
*If you want to adjust this HD reverse camera’s view angle,just use your hand to move up or down the camera body.
*If this hitch universal backup camera is mounted offset, the guidelines on image will be offset.
*Ideally to mount this HD backup car camera at the middle of the trim. If mount this reverse camera at side, it still works, but with guide line offset.
*This AHD reverse camera’s output video signal system is NTSC, so your head units or control boxes’ signal input have to be setting up to be NTSC, NOT PAL.
Starlight Level Night Vision 720P AHD Backup/Front view Camera
720P AHD/CVBS Starlight Level Night Vision Backup/Front View Camera allows you to see more clearly and safely while driving.
High Resolution CVBS and AHD video signal option
Universal backup camera license plate WD-779 support both CVBS and AHD video signal output (great for Android stereo). AHD video signal image is much clearer than CVBS,CVBS image’s is 600TVL (960*576 pixels),the AHD is 1000TVL (1280*720pixels).
How to choose 720P AHD signal input from your aftermarket Android OS head unit?
IP69K High Waterproof Rating
IP69K waterproof IP rating NATIKA universal backup camera WD-779. It designed with fully sealed glue filling craft, so the waterproof function is better than IP67 and IP68, no need to worry about water, fog or mist inside.
High Resolution (720P 1280*720 pixels(1000TVLs) AHD video signal option). Say goodbye to blurry, foggy, fuzzy, grainy, purple, low resolution image!
NATIKA AHD backup camera surface mount WD-779 built-in a LATEST high sensitive starlight level 720P FULL analog HD 1/2.7 inches image sensor and a digital high-definition image processor ISP(support 3D noise reduction), the effective pixels is 1280*720 pixels(1000TVL) base on AHD video signal output and 960*576 pixels (600TVL) base on CVBS video signal output, and the low illumination level is 0.005Lux/F1.2, also with a Grade A 6G All-glasses and F1.8 large aperture lens, so it presents you a amazing starlight level clear images even in very dark areas (at night or in dark environments,such as garage).
Amazing Night Vision
NATIKA backup camera license plate WD-779 shows you clear picture even in very dark areas, such as out of doors at night or inside of garage, because it built-in a latest 1/2.7inch 0.005Lux,excellent low-light performance high sensitive 5th GEN CMOS sensor and a 3th GEN Digital high-definition image sensor processor ISP(support 3D digital noise canceling technology),also with a grade A 6G All-glass and F1.8 large aperture lens, delivers sharp and crystal clear picture day and night.
NO fish-eye & distorted effect image
NATIKA universal reverse camera WD-779 built-in a LATEST high sensitive STARLIGHT LEVEL night vision HD 1/2.7inch fifth generation CMOS image sensor and a digital high-definition image processor ISP(support 3D digital noise canceling technology), also it with a LATEST 6pcs FULL glasses F1.8 large aperture optical system and horizontal 135 degree wide view angle lens,the picture no-fish-eye & no distorted effect,you will get a REAL picture when you backing up.
Useful Wide and Real View Angle
NATIKA Hitch universal backup camera built-in a LATEST Grade A 6G All-glass and F1.8 large aperture lens, the lens’ horizontal angle is 135 degrees(visible range up to 95%), thanks to the 135° viewing field, you’ll be able to see far more than you could in the rear view mirrors alone. It helps you to decrease blind zone accidents very well.(your kids and pets will be more safe behind or in front of your vehicles).
Wide Applicable Temperature
NATIKA universal car backup camera WD-779 built-in wide range temperature electronic parts and components, the range is from -22℉ to +185℉(-30℃ to +85℃), it is great weatherproof and can work perfectly not only in the high temperature summer but also in cold winter or snowy weather, also outlasts harsh weather like thunderstorms, rain and more, in short it can adapt to all kinds of bad weather.
Monitor/Screen/TFT Compatibility Beware
This backup car camera doesn’t fit sucked type dash cam and mirror dash cam,because dash cam have different connectors and PIN definition, even some of them with same 4PIN connector. If connect this vehicle backup camera to a GPS navigator,such as Garmin or TomTom,please separately order one more adapter which with a RCA to 2.5mm connector to complete installation.
Small size MINI 4PIN connector
NATIKA vehicle backup camera WD-779 with small size,solid materials grade A zinc alloy housing and 304 stainless steel brackets and screws.
Mini 4PIN connector is very small size,only 5MM,so it is very convenient for wiring,can save lots of your wiring time.
1. Find a flat surface or license plate for mounting this hitch backup/front view camera. 2. Connect the power wire of hitch backup camera to power of reversing light. 3. Connect the 26ft extension cable of hitch reverse camera to the head unit of the vehicle.
NOTE: 1).Please test the backup camera before routing 26ft extension cable from back to front.
2).Connected trigger A with B if your head unit with a trigger wire A, If not, no need connect them.
4.Start the vehicle and gear on reverse to test the hitch rear view camera.
5.Re-install the head unit.
Bracket surface mount reverse camera support IP69K waterproof IP rate. It designed with fully sealed glue filling craft, you absolutely no need to worry about water, fog or mist inside NOTE: please separately order a suitable harness to complete installation if connect it to a FACTORY RADIO
Rear view camera license plate support both CVBS and AHD video signal output(great for Android stereo). CVBS by default, cut the purple loop to choose AHD signal (AHD,720P,30fps). It with starlight level night vision (0.005Lux,excellent low-light performance), you never worry about parking during night, rainy day or in dark garage
Hitch reverse camera’s housing and brackets are metal and stainless, small size and with 2 in 1 mount option design ( license plate or bracket surface mount ). Also it built in 3 multifunctional switching loops: cut the white loop for front view, cut the green loop to remove the guidelines and cut the purple loop to choose AHD video output
Beware: According to our experience, some cheap or old Android stereos have the setting of AHD video signal input option, but the truth it does not work, because their hardware inside do not support it. If so, please use the default CVBS video signal output (do not cut the purple wire loop, otherwise you will get a black screen)